A Step-by-Step Installation Guide
Installing Roman shades is simple and can be completed in about 20–30 minutes with basic tools. Follow the steps below for a smooth and secure installation.
Before You Start
Tools You’ll Need
-
Measuring tape
-
Pencil
-
Drill or screwdriver
-
Level
-
Step stool or ladder
Check What’s Included
-
Roman shade
-
Mounting brackets
-
Screws
-
Valance (if included)
Step 1: Choose Mounting Style
Roman shades can be installed in two ways:
-
Inside Mount – Installed inside the window frame for a clean, tailored look
-
Outside Mount – Installed above the window frame for maximum coverage
Step 2: Mark Bracket Positions
Inside Mount
-
Position brackets inside the window frame
-
Place them about 2–3 inches from each side
-
Make sure brackets are level
Outside Mount
-
Position brackets above the window frame
-
Align evenly with the window edges
-
Use a level to ensure straight installation
Step 3: Install the Brackets
-
Drill pilot holes if necessary
-
Secure brackets using provided screws
-
Double-check that brackets are firmly attached
Step 4: Attach the Roman Shade
-
Align the headrail with the brackets
-
Snap or slide the shade into place (you should hear or feel a click)
-
Gently tug down to confirm it’s secure
Step 5: Test and Adjust
-
Pull the cord or operate the control mechanism
-
Raise and lower the shade a few times
-
Adjust alignment if needed
Step 6: Install the Valance (Optional)
-
Attach the valance to the front of the headrail
-
Press firmly until it snaps into place
Installation Complete 🎉
Your Roman shades are now installed and ready to use. Enjoy the perfect balance of style, light control, and privacy.
